HUGIN issues

classic Classic list List threaded Threaded
8 messages Options
Reply | Threaded
Open this post in threaded view
|

HUGIN issues

Nor Schramm

Hi,
 Thanks for allowing me in. A little about myself. I've been doing astrophotography for many years and occasionally want to image an object that  is larger than the field of view of my equipment. The obvious way of doing that  is to image the object in sections and then stitch them together to form one complete image. In the past I have been using  photoshop to manually match the segments and back grounds. A difficult problem at times. An acquaintance put me on to Hugin so I loaded up version 2012 and gave it a try on the, Pleiades. To my pleasant surprise it did a very good job of combining the 2x3 image grid into a single picture.

Later When I tried to open Hugin again, it requested the lens info twice and then quit. I tried it several more time even after rebooting the PC but still no luck. I decided to un install2012 and get the  latest from the website 2019.2 for 64bit WIndows10 PC.

When I first started the new version it complained about open GL not available. After rerunning it I got no more errors and loaded my 8 images 2x4 grid mosaic. Each image is 3020x1985 with an overlap of about 10%.  I selected the points automatically  but noticed there were no points is some of the images on the top and bottom  edge so I added them. 

Finally when I click the STITCH button it fails.


The  log is attached.

Any help would be appreciated.  If I'm using the wrong program to stitch these mosaics together perhaps someone can recommend one that would work better.

Thanks
 Nor

_._,_._,_

Groups.io Links:

You receive all messages sent to this group.
You automatically follow any topics you start or reply to.

View/Reply Online (#56) | [hidden email] | [hidden email] | Mute This Topic | New Topic


* Wiki: http://wiki.panotools.org
* User Guidelines: http://wiki.panotools.org/User_Guidelines
Your Subscription | [hidden email] | Unsubscribe [[hidden email]]
_._,_._,_

M31-1_312 - m31-8_311-h2019_3.log (2K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: HUGIN issues

mchans40 via groups.io
Nor, 

I'm unfamiliar with that particular software so I won't be of much help. 

I've been using PTGui for my panoramas. 


I used it for architecture, not as much since I bought a tilt-shift lens. 

Total file size was always a trick, when it got over 1G I had to reduce the individual file sizes so I could work. 

PTGui allows you to stitch bracketed shots if you need a high dynamic range image. 

I would make small global adjusted to my RAW files, save them as 16bit Tiffs, then load them into PTGui to stitch. 

I think my largest was 3 rows of 7,  21. Can't remember if they were bracketed. 

PTGui can create 360 views too. I have a pano head to capture all the view angles. It took 105 shots with a 50mm lens to make those. 

You may find a trial version on their web site. 

Hope this helps, 

Mike 



On Tuesday, December 1, 2020, 4:28 PM, Nor Schramm <[hidden email]> wrote:

Hi,
 Thanks for allowing me in. A little about myself. I've been doing astrophotography for many years and occasionally want to image an object that  is larger than the field of view of my equipment. The obvious way of doing that  is to image the object in sections and then stitch them together to form one complete image. In the past I have been using  photoshop to manually match the segments and back grounds. A difficult problem at times. An acquaintance put me on to Hugin so I loaded up version 2012 and gave it a try on the, Pleiades. To my pleasant surprise it did a very good job of combining the 2x3 image grid into a single picture.

Later When I tried to open Hugin again, it requested the lens info twice and then quit. I tried it several more time even after rebooting the PC but still no luck. I decided to un install2012 and get the  latest from the website 2019.2 for 64bit WIndows10 PC.

When I first started the new version it complained about open GL not available. After rerunning it I got no more errors and loaded my 8 images 2x4 grid mosaic. Each image is 3020x1985 with an overlap of about 10%.  I selected the points automatically  but noticed there were no points is some of the images on the top and bottom  edge so I added them. 

Finally when I click the STITCH button it fails.


The  log is attached.

Any help would be appreciated.  If I'm using the wrong program to stitch these mosaics together perhaps someone can recommend one that would work better.

Thanks
 Nor

_._,_._,_

Groups.io Links:

You receive all messages sent to this group.
You automatically follow any topics you start or reply to.

View/Reply Online (#63) | [hidden email] | [hidden email] | Mute This Topic | New Topic


* Wiki: http://wiki.panotools.org
* User Guidelines: http://wiki.panotools.org/User_Guidelines
Your Subscription | [hidden email] | Unsubscribe [[hidden email]]
_._,_._,_
Reply | Threaded
Open this post in threaded view
|

Re: HUGIN issues

Erik Krause
Administrator
In reply to this post by Nor Schramm
Am 01.12.2020 um 17:22 schrieb Nor Schramm:

> Thanks for allowing me in.

Your'e welcome! However, it could well be no one here can answer this
question. In this case I suggest you adress it to the hugin -ptx list:
https://groups.google.com/g/hugin-ptx

best regards
--
Erik Krause
http://www.erik-krause.de


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
You automatically follow any topics you start or reply to.
View/Reply Online (#57): https://groups.io/g/ptng/message/57
Mute This Topic: https://groups.io/mt/78645336/5342415
-=-=-
* Wiki: http://wiki.panotools.org
* User Guidelines: http://wiki.panotools.org/User_Guidelines
-=-=-
Group Owner: [hidden email]
Unsubscribe: https://groups.io/g/ptng/leave/9310255/998488758/xyzzy [[hidden email]]
-=-=-=-=-=-=-=-=-=-=-=-


Reply | Threaded
Open this post in threaded view
|

Re: HUGIN issues

Simon Sherwin
In reply to this post by Nor Schramm
You might like to try PtGui, the trial version. It’s not free and not necessarily better but you might find it easier and better behaved. 

Sent from Simon's iPhone 

On 1 Dec 2020, at 21:29, Nor Schramm <[hidden email]> wrote:



Hi,
 Thanks for allowing me in. A little about myself. I've been doing astrophotography for many years and occasionally want to image an object that  is larger than the field of view of my equipment. The obvious way of doing that  is to image the object in sections and then stitch them together to form one complete image. In the past I have been using  photoshop to manually match the segments and back grounds. A difficult problem at times. An acquaintance put me on to Hugin so I loaded up version 2012 and gave it a try on the, Pleiades. To my pleasant surprise it did a very good job of combining the 2x3 image grid into a single picture.

Later When I tried to open Hugin again, it requested the lens info twice and then quit. I tried it several more time even after rebooting the PC but still no luck. I decided to un install2012 and get the  latest from the website 2019.2 for 64bit WIndows10 PC.

When I first started the new version it complained about open GL not available. After rerunning it I got no more errors and loaded my 8 images 2x4 grid mosaic. Each image is 3020x1985 with an overlap of about 10%.  I selected the points automatically  but noticed there were no points is some of the images on the top and bottom  edge so I added them. 

Finally when I click the STITCH button it fails.


The  log is attached.

Any help would be appreciated.  If I'm using the wrong program to stitch these mosaics together perhaps someone can recommend one that would work better.

Thanks
 Nor

_._,_._,_

Groups.io Links:

You receive all messages sent to this group.
You automatically follow any topics you start or reply to.

View/Reply Online (#58) | [hidden email] | [hidden email] | Mute This Topic | New Topic


* Wiki: http://wiki.panotools.org
* User Guidelines: http://wiki.panotools.org/User_Guidelines
Your Subscription | [hidden email] | Unsubscribe [[hidden email]]
_._,_._,_

M31-1_312 - m31-8_311-h2019_3.log (2K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: HUGIN issues

Nor Schramm
In reply to this post by Erik Krause
HI Erik,
      OK thanks for that  info . That is what I was looking for. A good
contact.

Cheers
  Nor

On 12/1/2020 4:55 PM, Erik Krause wrote:

> Am 01.12.2020 um 17:22 schrieb Nor Schramm:
>
>> Thanks for allowing me in.
>
> Your'e welcome! However, it could well be no one here can answer this
> question. In this case I suggest you adress it to the hugin -ptx list:
> https://groups.google.com/g/hugin-ptx
>
> best regards
> --
> Erik Krause
> http://www.erik-krause.de
>
>
>
>
>
>

--
40°50’25.88"N / 74°54’52.75"W
Oxford, NJ USA
http://njstargazer.org



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
You automatically follow any topics you start or reply to.
View/Reply Online (#59): https://groups.io/g/ptng/message/59
Mute This Topic: https://groups.io/mt/78645336/5342415
-=-=-
* Wiki: http://wiki.panotools.org
* User Guidelines: http://wiki.panotools.org/User_Guidelines
-=-=-
Group Owner: [hidden email]
Unsubscribe: https://groups.io/g/ptng/leave/9310255/998488758/xyzzy [[hidden email]]
-=-=-=-=-=-=-=-=-=-=-=-


Reply | Threaded
Open this post in threaded view
|

Re: HUGIN issues

Brian Richards
In reply to this post by Simon Sherwin
Meshroom 2020 now has an HD/R stitching option, and it is free.

Brian

On Dec 1, 2020, at 17:44, smnshrwn <[hidden email]> wrote:

 You might like to try PtGui, the trial version. It’s not free and not necessarily better but you might find it easier and better behaved. 

Sent from Simon's iPhone 

On 1 Dec 2020, at 21:29, Nor Schramm <[hidden email]> wrote:



Hi,
 Thanks for allowing me in. A little about myself. I've been doing astrophotography for many years and occasionally want to image an object that  is larger than the field of view of my equipment. The obvious way of doing that  is to image the object in sections and then stitch them together to form one complete image. In the past I have been using  photoshop to manually match the segments and back grounds. A difficult problem at times. An acquaintance put me on to Hugin so I loaded up version 2012 and gave it a try on the, Pleiades. To my pleasant surprise it did a very good job of combining the 2x3 image grid into a single picture.

Later When I tried to open Hugin again, it requested the lens info twice and then quit. I tried it several more time even after rebooting the PC but still no luck. I decided to un install2012 and get the  latest from the website 2019.2 for 64bit WIndows10 PC.

When I first started the new version it complained about open GL not available. After rerunning it I got no more errors and loaded my 8 images 2x4 grid mosaic. Each image is 3020x1985 with an overlap of about 10%.  I selected the points automatically  but noticed there were no points is some of the images on the top and bottom  edge so I added them. 

Finally when I click the STITCH button it fails.


The  log is attached.

Any help would be appreciated.  If I'm using the wrong program to stitch these mosaics together perhaps someone can recommend one that would work better.

Thanks
 Nor

<M31-1_312 - m31-8_311-h2019_3.log>
_._,_._,_

Groups.io Links:

You receive all messages sent to this group.
You automatically follow any topics you start or reply to.

View/Reply Online (#60) | [hidden email] | [hidden email] | Mute This Topic | New Topic


* Wiki: http://wiki.panotools.org
* User Guidelines: http://wiki.panotools.org/User_Guidelines
Your Subscription | [hidden email] | Unsubscribe [[hidden email]]
_._,_._,_
Reply | Threaded
Open this post in threaded view
|

Re: HUGIN issues

Nor Schramm
In reply to this post by Simon Sherwin
Thanks I'll have a look.

Cheers
 Nor

On 12/1/2020 5:44 PM, smnshrwn wrote:
You might like to try PtGui, the trial version. It’s not free and not necessarily better but you might find it easier and better behaved. 

Sent from Simon's iPhone 

On 1 Dec 2020, at 21:29, Nor Schramm [hidden email] wrote:



Hi,
 Thanks for allowing me in. A little about myself. I've been doing astrophotography for many years and occasionally want to image an object that  is larger than the field of view of my equipment. The obvious way of doing that  is to image the object in sections and then stitch them together to form one complete image. In the past I have been using  photoshop to manually match the segments and back grounds. A difficult problem at times. An acquaintance put me on to Hugin so I loaded up version 2012 and gave it a try on the, Pleiades. To my pleasant surprise it did a very good job of combining the 2x3 image grid into a single picture.

Later When I tried to open Hugin again, it requested the lens info twice and then quit. I tried it several more time even after rebooting the PC but still no luck. I decided to un install2012 and get the  latest from the website 2019.2 for 64bit WIndows10 PC.

When I first started the new version it complained about open GL not available. After rerunning it I got no more errors and loaded my 8 images 2x4 grid mosaic. Each image is 3020x1985 with an overlap of about 10%.  I selected the points automatically  but noticed there were no points is some of the images on the top and bottom  edge so I added them. 

Finally when I click the STITCH button it fails.


The  log is attached.

Any help would be appreciated.  If I'm using the wrong program to stitch these mosaics together perhaps someone can recommend one that would work better.

Thanks
 Nor


-- 
40°50’25.88"N / 74°54’52.75"W
Oxford, NJ USA
http://njstargazer.org
_._,_._,_

Groups.io Links:

You receive all messages sent to this group.
You automatically follow any topics you start or reply to.

View/Reply Online (#61) | [hidden email] | [hidden email] | Mute This Topic | New Topic


* Wiki: http://wiki.panotools.org
* User Guidelines: http://wiki.panotools.org/User_Guidelines
Your Subscription | [hidden email] | Unsubscribe [[hidden email]]
_._,_._,_
Reply | Threaded
Open this post in threaded view
|

Re: HUGIN issues

Nor Schramm
In reply to this post by Brian Richards
Thanks Brian.
  Another option to investigate.

Cheers
  Nor


On 12/1/2020 7:27 PM, Brian Richards wrote:
> Meshroom 2020

--
40°50’25.88"N / 74°54’52.75"W
Oxford, NJ USA
http://njstargazer.org



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
You automatically follow any topics you start or reply to.
View/Reply Online (#62): https://groups.io/g/ptng/message/62
Mute This Topic: https://groups.io/mt/78645336/5342415
-=-=-
* Wiki: http://wiki.panotools.org
* User Guidelines: http://wiki.panotools.org/User_Guidelines
-=-=-
Group Owner: [hidden email]
Unsubscribe: https://groups.io/g/ptng/leave/9310255/998488758/xyzzy [[hidden email]]
-=-=-=-=-=-=-=-=-=-=-=-